AT3 Tactical ARO Micro Red Dot Sight – 3 MOA Reticle – Fastfire/Venom Compatible

Description

AT3’s Smallest Red Dot Sight, Improved for 2020
Even a great sight can be made better.  In addition to all models now shipping with a rubber lens cover, the ARO’s housing is now smaller, allowing it to ride on top of your red dot pistol slide cut for Fastfire or Venom pattern optics.  The ARO still boasts the largest viewing area of AT3’s Red Dot Sights, and it can be used on just about any platform; at a price that won’t break the bank.
A Dot with a View
This is our smallest red dot sight, with the biggest viewing area – with none of the bulk of a standard tube
Multi-coated lenses are scratch resistant, and provide excellent image clarity
Crisp 3 MOA red dot allows for accurate, both-eyes-open shooting on any platform
Parallax free design: The red dot stays on target, no matter where the shooter’s eye is
6 red dot brightness settings provide optimal visibility in any lighting conditions
Truly Adaptable
The ARO uses a Fastfire/Venom Style Mounting Footprint, and includes a removable Low Mount for Picatinny Rails
We also offer a .83″ Absolute Cowitness Cantilever Riser Mount – Ready for your Modern Sporting Platform
Mount it on your rifle, shotgun, or pistol – the ARO is built to take on just about everything!
Waterproof circuitry ensures you’ll stay on target even in adverse conditions
Shockproof circuitry resists damage, even when the dot takes a beating – from impact or recoil
High Value, Low Price
No other Micro Red Dot has an Absolute Cowitness riser mount at this price.
The ARO is factory direct – no markup from distributors.
Up to 5,000 Hours of Battery Life at Medium Brightness
CR1632 Lithium battery included.
Backed by the Lifetime AT3 Warranty. We stand behind our products!
About Riser Mounts
Low Mount – For Direct Mounting to Picatinny Rails
Med Profile .83” Riser Mount – for “absolute” cowitness with iron sights
Not sure what that all means?  Check our FAQ below!
Inside of the box:
ARO Red Dot Sight
NEW
Rubber Lens Cover
CR1632 Battery
Low Picatinny Mount
Instruction sheet
Lens cloth
Allen wrench for Windage Adjustment
Torx Wrench for Mounting Screws
Flathead Screwdriver for Battery Cap
OPTIONAL: .83″ Absolute Cowitness Riser Mount
Red Dot Sight Technical Specs
Power / Obj. Lens: 1x23mm
Reticle: 3 MOA Red Dot
Lens Coating: Multi-coated
Weight: 1.8 oz
Mounting Length: 1.9 inch / 48 mm
Mounting Width: 1.1 inch / 28 mm
Height: 1.2 inch / 30 mm
Objective Lens Area: 23mm x 21 mm
Battery Type: CR1632 (Battery Included)
Battery life: Approximately 5,000 Hours on Medium Setting
Auto Shut-off: 6 Hours
Windage/Elevation Click Value: 1 MOA per click
Adj Range: +/- 50 MOA (total adjustment range 100 MOA)
Eye Relief: Unlimited
Parallax Adjustment: Fixed
Field of View: Unlimited
Night Vision Compatible: No
Nitrogen filled: Yes
Waterproof/Fogproof: Yes
Recoil resistance – Certified up to 500g’s. Certified for use with large-caliber rifles and shotguns, as well as “springer” airguns with 2-way recoil
Body material: 6061 Aluminum
Finish: Matte black anodized
ARO Cantilever Riser Mount Technical Specs
Mount Type: Burris Fastfire/Vortex Venom Footprint
Length: 1.6″
Material: Black Anodized Aircraft Aluminum
Saddle Height: .83″
Weight: 1.1 oz
Frequently Asked Questions
Q:
How do I mount the ARO to my pistol?
A: The easiest way to mount the ARO to a pistol slide is by using an adapter plate in the Fastfire Pattern. Many adapter plates
can be used simply by drifting out the rear sight of many popular pistols on the market.
The ARO may not fit in pistol slides cut specifically for Fastfire red dot sights.
Q:
How do I know which riser mount to get?
A:
For modern rifle platforms, we recommend the .83″ Mount if you are running without iron sights, since it puts the red dot at the standard height of iron sights. If you’re running a shotgun, pistol, or any firearm with a “drop comb” where the cheek rest is lower than the top of the receiver, the Low Mount will serve you just fine.
If you go with the .83″ Mount, you’ll also get the Low Mount – if you plan to move the optic around multiple platforms, go with that option!
Q:
Do I need to use iron sights along with with the ARO Red Dot Sight?
A:
NO – Iron sights are not required to use this red dot sight! The red dot sight can be used on its own. Many people choose to use iron sights as a backup, but they are optional. This red dot sight will work great on “optics ready” rifles that don’t have any iron sights.